Skip to content
Search for:
Home
Shop
My Account
Cart
Checkout
About us
Contact
Flange Joint Analysis according to 1591-1 for EN 1092 Compliant Flanges
€
79,00
Get an instant overview of the safety and reliability of your flange connection. After completing our form, you will receive a comprehensive analysis report in accordance with EN 1591-1, including specific recommendations for bolt tension, sealing materials, and assembly procedures. This guarantees a leak-free and durable connection that meets the highest safety and quality standards.
Pressure Nominal
PN 2,5
PN 6,0
PN 10,0
PN 16,0
PN 25,0
PN 40,0
PN 63,0
PN 100,0
PN 160,0
PN 250,0
PN 320,0
Diameter Nominal
DN 10
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 200
DN 250
DN 300
DN 350
DN 400
DN 450
DN 500
DN 600
DN 700
DN 800
DN 900
DN 1000
DN 1200
DN 1400
DN 1600
DN 1800
DN 2000
DN 2200
DN 2400
DN 2600
DN 2800
DN 3000
DN 3200
DN 3400
DN 3600
DN 3800
DN 4000
Flange Type
Weld-Neck Flange / Integral Flange
Slip-on Flange / Special Welded Flange
Flange Material
Choose an option
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-2: Flat products made of steels for pressure purposes,
Non-alloy and alloy steels with specified elevated temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0345 / P235GH = H I / Rp0,2 / 0 <T ≤ 16
1.0345 / P235GH = H I / Rp0,2 / 16< T ≤ 40
1.0345 / P235GH = H I / Rp0,2 / 40< T ≤ 60
1.0345 / P235GH = H I / Rp0,2 / 60< T ≤ 100
1.0345 / P235GH = H I / Rp0,2 / 100< T ≤ 150
1.0345 / P235GH = H I / Rp0,2 / 150< T ≤ 250
1.0425 / P265GH = H II / Rp0,2 / 0 <T ≤ 16
1.0425 / P265GH = H II / Rp0,2 / 16< T ≤ 40
1.0425 / P265GH = H II / Rp0,2 / 40< T ≤ 60
1.0425 / P265GH = H II / Rp0,2 / 60< T ≤ 100
1.0425 / P265GH = H II / Rp0,2 / 100< T ≤ 150
1.0425 / P265GH = H II / Rp0,2 / 150< T ≤ 250
1.0473 / P355GH / Rp0,2 / 0 <T ≤ 16
1.0473 / P355GH / Rp0,2 / 16< T ≤ 40
1.0473 / P355GH / Rp0,2 / 40< T ≤ 60
1.0473 / P355GH / Rp0,2 / 60< T ≤ 100
1.0473 / P355GH / Rp0,2 / 100< T ≤ 150
1.0473 / P355GH / Rp0,2 / 150< T ≤ 250
1.0481 / P295GH / Rp0,2 / 0 <T ≤ 16
1.0481 / P295GH / Rp0,2 / 16< T ≤ 40
1.0481 / P295GH / Rp0,2 / 40< T ≤ 60
1.0481 / P295GH / Rp0,2 / 60< T ≤ 100
1.0481 / P295GH / Rp0,2 / 100< T ≤ 150
1.0481 / P295GH / Rp0,2 / 150< T ≤ 250
1.5415 / 16Mo3 / Rp0,2 / 0 <T ≤ 16
1.5415 / 16Mo3 / Rp0,2 / 16< T ≤ 40
1.5415 / 16Mo3 / Rp0,2 / 40< T ≤ 60
1.5415 / 16Mo3 / Rp0,2 / 60< T ≤ 100
1.5415 / 16Mo3 / Rp0,2 / 100< T ≤ 150
1.5415 / 16Mo3 / Rp0,2 / 150< T ≤ 250
1.5414 / 18MnMo4-5 / Rp0,2 / 0 <T ≤ 60
1.5414 / 18MnMo4-5 / Rp0,2 / 60 <T ≤ 150
1.5414 / 18MnMo4-5 / Rp0,2 / 150 <T ≤ 250
1.6311 / 20MnMoNi4-5 / Rp0,2 / 0 <T ≤ 40
1.6311 / 20MnMoNi4-5 / Rp0,2 / 40 <T ≤ 60
1.6311 / 20MnMoNi4-5 / Rp0,2 / 60 <T ≤ 100
1.6311 / 20MnMoNi4-5 / Rp0,2 / 100 <T ≤ 150
1.6311 / 20MnMoNi4-5 / Rp0,2 / 150 <T ≤ 250
1.7335 / 13CrMo4-5 / Rp0,2 / 0 <T ≤ 16
1.7335 / 13CrMo4-5;Rp0,2 / 16< T ≤ 60
1.7335 / 13CrMo4-5;Rp0,2 / 60< T ≤ 100
1.7335 / 13CrMo4-5;Rp0,2 / 100< T < 150
1.7335 / 13CrMo4-5;Rp0,2 / 150< T < 250
1.7336+NT / 13CrMoSi5-5;Rp0,2 / 0< T < 60
1.7336+NT / 13CrMoSi5-5;Rp0,2 / 60< T < 100
1.7380 / 10CrMo9-10;Rp0,2 / 0 <T ≤ 16
1.7380 / 10CrMo9-10;Rp0,2 / 16< T ≤ 40
1.7380 / 10CrMo9-10;Rp0,2 / 40< T ≤ 60
1.7380 / 10CrMo9-10;Rp0,2 / 60< T ≤ 100
1.7380 / 10CrMo9-10;Rp0,2 / 100< T ≤ 150
1.7380 / 10CrMo9-10;Rp0,2 / 150< T ≤ 250
1.7375 / 12CrMo9-10;Rp0,2 / 0< T ≤ 250
1.7362 / X12CrMo5; Rp0,2 / 0< T ≤ 60
1.7362 / X12CrMo5; Rp0,2 / 60< T ≤ 250
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-3: Flat products made of steels for pressure purposes.
Weldable fine grain steels.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0487 / P275NH / Rp0,2 / 0< T ≤ 16
1.0487 / P275NH / Rp0,2 / 16 <T ≤ 40
1.0487 / P275NH / Rp0,2 / 40 <T ≤ 60
1.0487 / P275NH / Rp0,2 / 60 <T ≤ 100
1.0487 / P275NH / Rp0,2 / 100 <T ≤ 150
1.0487 / P275NH / Rp0,2 / 150 <T ≤ 250
1.0565 / P355NH / Rp0,2 / 0< T ≤ 16
1.0565 / P355NH / Rp0,2 / 16 <T ≤ 40
1.0565 / P355NH / Rp0,2 / 40 <T ≤ 60
1.0565 / P355NH / Rp0,2 / 60 <T ≤ 100
1.0565 / P355NH / Rp0,2 / 100 <T ≤ 150
1.0565 / P355NH / Rp0,2 / 150 <T ≤ 250
1.8935 / P460NH / Rp0,2 / 0< T ≤ 16
1.8935 / P460NH / Rp0,2 / 16 <T ≤ 40
1.8935 / P460NH / Rp0,2 / 40 <T ≤ 60
1.8935 / P460NH / Rp0,2 / 60 <T ≤ 100
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Flat products made of steels for pressure purposes.
Nickel alloy steels with specified low temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.6228 / 15NiMn6 / Rp0,2 / 0< T ≤
1.5637 / 12Ni14 / Rp0,2 / 0< T ≤
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-7: Flat products made of steels for pressure purposes.
Stainless steels.
Validity: Rp1.0% proof strength
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.4301 / X5CrNi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4306 / X2CrNiN18-9 / Rp1,0 / T ≤ 75
1.4307 / X2CrNi18-9 / Rp1,0 / 3 ≤ T ≤ 75
1.4311 / X2CrNiN18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4315 / X5CrNiN19-9 / Rp1,0 / 3 ≤ T ≤ 75
1.4401 / X5CrNiMo17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4404 / X2CrNiMo17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4406 / X2CrNiMoN17-11-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4429 / X2CrNiMoN17-13-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4432 / X2CrNiMo17-12-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4435 / X2CrNiMo18-14-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4436 / X3CrNiMo17-13-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4439 / X2CrNiMoN17-13-5 / Rp1,0 / 3 ≤ T ≤ 75
1.4529 / X1NiCrMoCuN25-20. / Rp1,0 / 3 ≤ T ≤ 75
1.4539 / X1NiCrMoCu25-20. / Rp1,0 / 3 ≤ T ≤ 75
1.4541 / X6CrNiTi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4547 / X1CrNiMoCuN20-18. / Rp1,0 / 3 ≤ T ≤ 75
1.4571 / X6CrNiMoTi17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4910 / X3CrNiMoBN17-13-/ Rp1,0 / 3 ≤ T ≤ 75
1.4941 / X6CrNiTiB18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4948 / X6CrNi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4950 / X6CrNi23-13 / Rp1,0 / 3 ≤ T ≤ 75
1.4951 / X6CrNi25-20 / Rp1,0 / 3 ≤ T ≤ 75
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10222-2: Steel forgings for pressure purposes.
Ferritic and martensitic steels with specified elevated temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0352 / P245GH / Rp0,2 / 0<T ≤ 50
1.0352 / P245GH / Rp0,2 / 50 <T ≤ 160
1.0426 / P280GH / Rp0,2 / 0<T ≤ 50
1.0426 / P280GH / Rp0,2 / 50 <T ≤ 160
1.0436 / P305GH / Rp0,2 / 0<T ≤ 50
1.0436 / P305GH / Rp0,2 / 50 <T ≤ 160
1.5415 / 16Mo3 / Rp0,2 / 0 <T ≤ 60
1.5415 / 16Mo3 / Rp0,2 / 60 <T ≤ 90
1.5415 / 16Mo3 / Rp0,2 / 90 <T ≤ 150
1.5415 / 16Mo3 / Rp0,2 / 150 <T ≤ 250
1.6308 / 18MnMoNi5-5;Rp0,2 / 0 bis 200
1.6920 / 15MnCrMoNiV5-3;Rp0,2 / 0 bis 100
1.7335 / 13CrMo4-5 / Rp0,2 / 0 <T ≤ 60
1.7335 / 13CrMo4-5 / Rp0,2 / 60 <T ≤ 90
1.7335 / 13CrMo4-5;Rp0,2 / 90< T ≤ 150
1.7335 / 13CrMo4-5;Rp0,2 / 150< T ≤ 250
1.7383 / 11CrMo9-10;Rp0,2 / 0 bis 200
1.7715 / 14MoV6-3 / Rp0,2 / 0 <T ≤ 500
1.4903 / X10CrMoVNb9-1;Rp0,2 / 0 bis 130
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10222-4: Steel forgings for pressure purposes.
Weldable fine grain steels with high proof strength.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0477 / P285NH / Rp0,2 / 0<T ≤ 35
1.0477 / P285NH / Rp0,2 / 35 <T ≤ 70
1.0477 / P285NH / Rp0,2 / 70 <T ≤ 100
1.0477 / P285NH / Rp0,2 / 100 <T ≤ 250
1.0478 / P285QH / Rp0,2 / 0 <T ≤ 35
1.0478 / P285QH / Rp0,2 / 35 <T ≤ 70
1.0478 / P285QH / Rp0,2 / 70 <T ≤ 100
1.0478 / P285QH / Rp0,2 / 100 <T ≤ 250
1.0565 / P355NH / Rp0,2 / 0 <T ≤ 50
1.0565 / P355NH / Rp0,2 / 50 <T ≤ 100
1.0565 / P355NH / Rp0,2 / 100 <T ≤ 150
1.0565 / P355NH / Rp0,2 / 150 <T ≤ 250
1.0571 / P355QH1 / Rp0,2 / 0 <T ≤ 50
1.0571 / P355QH1 / Rp0,2 / 50 <T ≤ 100
1.0571 / P355QH1 / Rp0,2 / 100 <T ≤ 150
1.0571 / P355QH1 / Rp0,2 / 150 <T ≤ 250
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10222-5. Steel forgings for pressure purposes.
Martensitic, austenitic and austenitic-ferritic stainless steels.
Validity: Rp1.0% proof strength
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.4301 / X5CrNi18-10 / Rp1,0
1.4307 / X2CrNi18-9 / Rp1,0
1.4311 / X2CrNiN18-10 / Rp1,0
1.4401 / X5CrNiMo17-12-2 / Rp1,0
1.4404 / X2CrNiMo17-12-2 / Rp1,0
1.4406 / X2CrNiMoN17-11-2 / Rp1,0
1.4429 / X2CrNiMoN17-13-3 / Rp1,0
1.4432 / X2CrNiMo17-12-3 / Rp1,0
1.4435 / X2CrNiMo18-14-3 / Rp1,0 / T ≤ 75
1.4436 / X3CrNiMo17-13-3 / Rp1,0
1.4541 / X6CrNiTi18-10 / Rp1,0
1.4571 / X6CrNiMoTi17-12-2 / Rp1,0
1.4910 / X3CrNiMoBN17-13-/ Rp1,0 / T ≤ 75
1.4941 / X6CrNiTiB18-10 / Rp1,0
1.4948 / X6CrNi18-10 / Rp1,0
1.4439 / X2CrNiMoN17-13-5 / Rp1,0
1.4547 / X1CrNiMoCuN20-18-7 / Rp1,0
Pipe/Shell Material
Choose an option
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10216-2 Seamless steel tubes for pressure purposes
Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0348 / P195GH, Rp0,2 / T ≤ 16
1.0345 / P235GH, Rp0,2 / T ≤ 16
1.0345 / P235GH, Rp0,2 / 16 <T ≤ 40
1.0345 / P235GH, Rp0,2 / 40 <T ≤ 60
1.0425 / P265GH, Rp0,2 / T ≤ 16
1.0425 / P265GH, Rp0,2 / 16<T ≤ 40
1.0425 / P265GH, Rp0,2 / 40<T ≤ 60
1.0471 / 20MnNb6, Rp0,2 / T ≤ 16
1.0471 / 20MnNb6, Rp0,2 / 16<T ≤ 40
1.0471 / 20MnNb6, Rp0,2 / 40 <T ≤ 60
1.5415 / 16Mo3; Rp0,2 / 0<T ≤ 16
1.5415 / 16Mo3; Rp0,2 / 16<T ≤ 40
1.5415 / 16Mo3; Rp0,2 / 40<T ≤ 60
1.5450 / 8MoB5-4; Rp0,2 / T ≤ 16
1.4903 / X10CrMoVNb9, Rp0,2 / <=100
1.4922 / X20CrMoV11, Rp0,2 / <= 100
1.6368 / 15NiCuMoNb5-6; Rp0,2 / T ≤ 80
1.7338 / 10CrMo5-5; Rp0,2 / 0<T ≤ 40
1.7338 / 10CrMo5-5; Rp0,2 / 40<T ≤ 60
1.7335 / 13CrMo4-5; Rp0,2 / 0<T ≤ 40
1.7335 / 13CrMo4-5; Rp0,2 / 40<T ≤ 60
1.7380 / 10CrMo9-10; Rp0,2 / T<= 40
1.7380 / 10CrMo9-10; Rp0,2 / 40 <T ≤ 60
1.7383 / 11CrMo9-10; Rp0,2 / T ≤ 60
1.7218 / 25CrMo4; Rp0,2 / 0<T ≤ 60
1.7779 / 20CrMoV13-5; Rp0,2 / T ≤ 60
1.8201 / 7CrWVMoNb9-6; Rp0,2 / T ≤ 60
1.7378 / 7CrMoVTiB10-10; Rp0,2 / T ≤ 50
1.7362+NT1 /X11CrMo5+NT1; Rp0,2 / T ≤ 100
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10216-3 Seamless steel tubes for pressure purposes.
Part 3: Alloy fine grain steel tubes.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0488 / P275NL1, Rp0,2 / T ≤ 40
1.0488 / P275NL1, Rp0,2 / 40 - 50
1.0562 / P355N, Rp0,2 / 0<T ≤ 20
1.0562 / P355N, Rp0,2 / 20<T ≤ 40
1.0562 / P355N, Rp0,2 / 40<T ≤ 50
1.1104 / P275NL2, Rp0,2 / T ≤ 40
1.1104 / P275NL2; Rp0,2 / 40 - 50
1.1104 / P275NL2; Rp0,2 / 40<T ≤ 50
1.1106 / P355NL2; Rp0,2 / 0<T ≤ 20
1.1106 / P355NL2; Rp0,2 / 20<T - 40
1.1106 / P355NL2; Rp0,2 / 40<T - 50
1.8905 / P460N / Rp0,2 / T ≤ 12
1.8905 / P460N, Rp0,2 / 12<T ≤ 20
1.8905 / P460N, Rp0,2 / 20<T ≤ 40
1.8905 / P460N, Rp0,2 / 40<T ≤ 50
1.8915 / P460NL1, Rp0,2 / 0< T ≤ 12
1.8915 / P460NL1; Rp0,2 / 12<T ≤ 20
1.8915 / P460NL1; Rp0,2 / 20<T ≤ 40
1.8915 / P460NL1; Rp0,2 / 40<T ≤ 50
1.8915 / P460NL1; Rp0,2 / 50<T ≤ 65
1.8918 / P460NL2; Rp0,2 / 0<T ≤ 12
1.8918 / P460NL2; Rp0,2 / 12<T ≤ 20
1.8918 / P460NL2; Rp0,2 / 20<T ≤ 40
1.8918 / P460NL2; Rp0,2 / 40<T ≤ 50
1.8876 / P620Q, Rp0,2 / 0<T ≤ 20
1.8876 / P620Q, Rp0,2 / 20<T ≤ 40
1.8876 / P620Q, Rp0,2 / 40<T ≤ 50
1.0565 / P355NH / 0<T ≤ 20
1.0565 / P355NH / 20<T ≤ 40
1.0565 / P355NH / 40<T ≤ 50
1.0565 / P355NH / 50<T ≤ 65
1.0565 / P355NH / 65<T ≤ 80
1.8935 / P460NH / 0<T ≤ 12
1.8935 / P460NH / 12<T ≤ 20
1.8935 / P460NH / 20<T ≤ 40
1.8935 / P460NH / 40<T ≤ 50
1.8935 / P460NH / 50<T ≤ 65
1.8935 / P460NH / 65<T ≤ 80
1.8877 / P620QH / 0<T ≤ 20
1.8877 / P620QH / 20<T ≤ 40
1.8877 / P620QH / 40<T ≤ 50
1.8877 / P620QH / 50<T ≤ 65
1.8880 / P690QH / 0<T ≤ 20
1.8880 / P690QH / 20<T ≤ 40
1.8880 / P690QH / 40<T ≤ 50
1.8880 / P690QH / 50<T ≤ 65
1.8880 / P690QH / 65<T ≤ 80
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10216-4 Seamless steel tubes for pressure purposes.
Part 4: Non-alloy and alloy steel tubes with specified low temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10216-5: Seamless steel tubes for pressure purposes.
Part 5: Stainless steel tubes.
Validity: Rp1.0% proof strength
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.4301 / X5CrNi18-10 / Rp1,0 T ≤ 60
1.4306 / X2CrNi19-11 / Rp1,0 T ≤ 60
1.4307 / X2CrNi18-9 / Rp1,0 T ≤ 60
1.4311 / X2CrNiN18-10 / Rp1,0 T ≤ 60
1.4401 / X5CrNiMo17-12-2 / Rp1,0 T ≤ 60
1.4404 / X2CrNiMo17-12-2 / Rp1,0 T ≤ 60
1.4429 / X2CrNiMoN17.. / Rp1,0 T ≤ 60
1.4435 / X2CrNiMo18-14-3 / Rp1,0 T ≤ 60
1.4436 / X3CrNiMo17-13-3 / Rp1,0 T ≤ 60
1.4439 / X2CrNiMoN17.. / Rp1,0 T ≤ 60
1.4529 / X1NiCrMoCuN25../ Rp1,0 T ≤ 60
1.4539 / X1NiCrMoCu25.. / Rp1,0 T ≤ 60
1.4541 / X6CrNiTi18-10 / Rp1,0 / kaltgef. T ≤ 60
1.4541 / X6CrNiTi18-10 / Rp1,0 T ≤ 60
1.4547 / X1CrNiMoCuN20. / Rp1,0 T ≤ 60
1.4550 / X6CrNiNb18-10 / Rp1,0 T ≤ 60
1.4563 / X1NiCrMoCu31. / Rp1,0 T ≤ 60
1.4571 / X6CrNiMoTi17. / Rp1,0 / kaltgef. T ≤ 60
1.4571 / X6CrNiMoTi17. / Rp1,0 T ≤ 60
1.4580 / X6CrNiMoNb17.. / Rp1,0 T ≤ 60
1.4910 / X3CrNiMoNB17. / Rp1,0 T ≤ 60
1.4941 / X7CrNiTiB18-10 / Rp1,0 T ≤ 60
1.4948 / X6CrNi18-10 / Rp1,0 T ≤ 60
1.4958 / X5NiCrA1Ti31-20 / Rp1,0 T ≤ 60
1.4959 / X8NiCrA1Ti32-21 / Rp1,0 T ≤ 60
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10217-2: Welded steel tubes for pressure purposes.
Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0345 / P235GH; Rp0,2 / T<=16
1.0348 / P195GH, Rp0,2 / T<= 16
1.0425 / P265GH, Rp0,2 / T<= 16
1.5415 / 16Mo3;Rp0,2 / T<=16
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10217-3: Welded steel tubes for pressure purposes.
Part 3: Alloy fine grain steel tubes.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0488 / P275NL1; Rp0,2 / T<=16
1.1104 / P275NL2; Rp0,2 / T<=16
1.0566 / P355NL1; Rp0,2 / T<=16
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10217-7: Welded steel tubes for pressure purposes.
Part 7: Stainless steel tubes.
Validity: Rp1.0% proof strength
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.4301 / X5CrNi18-10 / Rp1,0 / T ≤ 60
1.4306 / X2CrNi19-11 / Rp1,0 / T ≤ 60
1.4307 / X2CrNi18-9 / Rp1,0 / T ≤ 60
1.4311 / X2CrNiN18-10 / Rp1,0 / T ≤ 60
1.4401 / X5CrNiMo17-12-2 / Rp1,0 / T ≤ 60
1.4404 / X2CrNiMo17-12-2 / Rp1,0 / T ≤ 60
1.4429 / X2CrNiMoN17.. / Rp1,0 / T ≤ 60
1.4435 / X2CrNiMo18-14-3 / Rp1,0 / T ≤ 60
1.4436 / X3CrNiMo17-13-3 / Rp1,0 / T ≤ 60
1.4439 / X2CrNiMoN17.. / Rp1,0 / T ≤ 60
1.4541 / X6CrNiTi18-10 / Rp1,0 / T ≤ 60
1.4550 / X6CrNiNb18-10 / Rp1,0 / T ≤ 60
1.4563 / X1NiCrMoCu31. / Rp1,0 / T ≤ 60
1.4571 / X6CrNiMoTi17. / Rp1,0 / T ≤ 60
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-2: Flat products made of steels for pressure purposes.
Non-alloy and alloy steels with specified elevated temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0345 / P235GH = H I / Rp0,2 / 0 <T ≤ 16
1.0345 / P235GH = H I / Rp0,2 / 16< T ≤ 40
1.0345 / P235GH = H I / Rp0,2 / 40< T ≤ 60
1.0345 / P235GH = H I / Rp0,2 / 60< T ≤ 100
1.0345 / P235GH = H I / Rp0,2 / 100< T ≤ 150
1.0345 / P235GH = H I / Rp0,2 / 150< T ≤ 250
1.0425 / P265GH = H II / Rp0,2 / 0 <T ≤ 16
1.0425 / P265GH = H II / Rp0,2 / 16< T ≤ 40
1.0425 / P265GH = H II / Rp0,2 / 40< T ≤ 60
1.0425 / P265GH = H II / Rp0,2 / 60< T ≤ 100
1.0425 / P265GH = H II / Rp0,2 / 100< T ≤ 150
1.0425 / P265GH = H II / Rp0,2 / 150< T ≤ 250
1.0473 / P355GH / Rp0,2 / 0 <T ≤ 16
1.0473 / P355GH / Rp0,2 / 16< T ≤ 40
1.0473 / P355GH / Rp0,2 / 40< T ≤ 60
1.0473 / P355GH / Rp0,2 / 60< T ≤ 100
1.0473 / P355GH / Rp0,2 / 100< T ≤ 150
1.0473 / P355GH / Rp0,2 / 150< T ≤ 250
1.0481 / P295GH / Rp0,2 / 0 <T ≤ 16
1.0481 / P295GH / Rp0,2 / 16< T ≤ 40
1.0481 / P295GH / Rp0,2 / 40< T ≤ 60
1.0481 / P295GH / Rp0,2 / 60< T ≤ 100
1.0481 / P295GH / Rp0,2 / 100< T ≤ 150
1.0481 / P295GH / Rp0,2 / 150< T ≤ 250
1.5415 / 16Mo3 / Rp0,2 / 0 <T ≤ 16
1.5415 / 16Mo3 / Rp0,2 / 16< T ≤ 40
1.5415 / 16Mo3 / Rp0,2 / 40< T ≤ 60
1.5415 / 16Mo3 / Rp0,2 / 60< T ≤ 100
1.5415 / 16Mo3 / Rp0,2 / 100< T ≤ 150
1.5415 / 16Mo3 / Rp0,2 / 150< T ≤ 250
1.5414 / 18MnMo4-5 / Rp0,2 / 0 <T ≤ 60
1.5414 / 18MnMo4-5 / Rp0,2 / 60 <T ≤ 150
1.5414 / 18MnMo4-5 / Rp0,2 / 150 <T ≤ 250
1.6311 / 20MnMoNi4-5 / Rp0,2 / 0 <T ≤ 40
1.6311 / 20MnMoNi4-5 / Rp0,2 / 40 <T ≤ 60
1.6311 / 20MnMoNi4-5 / Rp0,2 / 60 <T ≤ 100
1.6311 / 20MnMoNi4-5 / Rp0,2 / 100 <T ≤ 150
1.6311 / 20MnMoNi4-5 / Rp0,2 / 150 <T ≤ 250
1.7335 / 13CrMo4-5 / Rp0,2 / 0 <T ≤ 16
1.7335 / 13CrMo4-5;Rp0,2 / 16< T ≤ 60
1.7335 / 13CrMo4-5;Rp0,2 / 60< T ≤ 100
1.7335 / 13CrMo4-5;Rp0,2 / 100< T < 150
1.7335 / 13CrMo4-5;Rp0,2 / 150< T < 250
1.7336+NT / 13CrMoSi5-5;Rp0,2 / 0< T < 60
1.7336+NT / 13CrMoSi5-5;Rp0,2 / 60< T < 100
1.7380 / 10CrMo9-10;Rp0,2 / 0 <T ≤ 16
1.7380 / 10CrMo9-10;Rp0,2 / 16< T ≤ 40
1.7380 / 10CrMo9-10;Rp0,2 / 40< T ≤ 60
1.7380 / 10CrMo9-10;Rp0,2 / 60< T ≤ 100
1.7380 / 10CrMo9-10;Rp0,2 / 100< T ≤ 150
1.7380 / 10CrMo9-10;Rp0,2 / 150< T ≤ 250
1.7375 / 12CrMo9-10;Rp0,2 / 0< T ≤ 250
1.7362 / X12CrMo5; Rp0,2 / 0< T ≤ 60
1.7362 / X12CrMo5; Rp0,2 / 60< T ≤ 250
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-3: Flat products made of steels for pressure purposes.
Weldable fine grain steels.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.0487 / P275NH / Rp0,2 / 0< T ≤ 16
1.0487 / P275NH / Rp0,2 / 16 <T ≤ 40
1.0487 / P275NH / Rp0,2 / 40 <T ≤ 60
1.0487 / P275NH / Rp0,2 / 60 <T ≤ 100
1.0487 / P275NH / Rp0,2 / 100 <T ≤ 150
1.0487 / P275NH / Rp0,2 / 150 <T ≤ 250
1.0565 / P355NH / Rp0,2 / 0< T ≤ 16
1.0565 / P355NH / Rp0,2 / 16 <T ≤ 40
1.0565 / P355NH / Rp0,2 / 40 <T ≤ 60
1.0565 / P355NH / Rp0,2 / 60 <T ≤ 100
1.0565 / P355NH / Rp0,2 / 100 <T ≤ 150
1.0565 / P355NH / Rp0,2 / 150 <T ≤ 250
1.8935 / P460NH / Rp0,2 / 0< T ≤ 16
1.8935 / P460NH / Rp0,2 / 16 <T ≤ 40
1.8935 / P460NH / Rp0,2 / 40 <T ≤ 60
1.8935 / P460NH / Rp0,2 / 60 <T ≤ 100
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-4: Flat products made of steels for pressure purposes.
Nickel alloy steels with specified low temperature properties.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.6228 / 15NiMn6 / Rp0,2 / 0< T ≤
1.5637 / 12Ni14 / Rp0,2 / 0< T ≤
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
EN 10028-7: Flat products made of steels for pressure purposes,
Stainless steels.
Validity: Rp1.0% proof strength
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.4301 / X5CrNi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4306 / X2CrNiN18-9 / Rp1,0 / T ≤ 75
1.4307 / X2CrNi18-9 / Rp1,0 / 3 ≤ T ≤ 75
1.4311 / X2CrNiN18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4315 / X5CrNiN19-9 / Rp1,0 / 3 ≤ T ≤ 75
1.4401 / X5CrNiMo17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4404 / X2CrNiMo17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4406 / X2CrNiMoN17-11-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4429 / X2CrNiMoN17-13-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4432 / X2CrNiMo17-12-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4435 / X2CrNiMo18-14-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4436 / X3CrNiMo17-13-3 / Rp1,0 / 3 ≤ T ≤ 75
1.4439 / X2CrNiMoN17-13-5 / Rp1,0 / 3 ≤ T ≤ 75
1.4529 / X1NiCrMoCuN25-20. / Rp1,0 / 3 ≤ T ≤ 75
1.4539 / X1NiCrMoCu25-20. / Rp1,0 / 3 ≤ T ≤ 75
1.4541 / X6CrNiTi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4547 / X1CrNiMoCuN20-18. / Rp1,0 / 3 ≤ T ≤ 75
1.4571 / X6CrNiMoTi17-12-2 / Rp1,0 / 3 ≤ T ≤ 75
1.4910 / X3CrNiMoBN17-13-/ Rp1,0 / 3 ≤ T ≤ 75
1.4941 / X6CrNiTiB18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4948 / X6CrNi18-10 / Rp1,0 / 3 ≤ T ≤ 75
1.4950 / X6CrNi23-13 / Rp1,0 / 3 ≤ T ≤ 75
1.4951 / X6CrNi25-20 / Rp1,0 / 3 ≤ T ≤ 75
Bolt Type
Hexagon head bolt with shank
Threaded stud/rod) without shank
Stretch-shank bolt
Bolt Material
Choose an option
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Bolt, NA, DIN EN ISO 898-1, ≤ M39:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Strength class 5.6
Strength class 8.8
Strength class 10.9
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Bolt, A, EN ISO 3506-1
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Strength class A2-50, Ø ≤ M 39
Strength class A3-50, Ø ≤ M 39
Strength class A4-50, Ø ≤ M 39
Strength class A5-50, Ø ≤ M 39
Strength class A2-70, Ø ≤ M 24
Strength class A3-70, Ø ≤ M 24
Strength class A4-70, Ø ≤ M 24
Strength class A5-70, Ø ≤ M 24
Strength class A2-70, > M 24 ≤ M 30
Strength class A3-70, > M 24 ≤ M 30
Strength class A4-70, > M 24 ≤ M 30
Strength class A5-70, > M 24 ≤ M 30
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Bolt, NA / A, DIN EN 10269, Rp0.2%, ≥ -10°C:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.1181 / C35E / d ≤ 60
1.1181 / C35E / 60 ≤ d < 150
1.1191 / C45E / d ≤ 60
1.1191 / C45E / d ≤ 150
1.5511 / 35B2 / d ≤ 60
1.5511 / 35B2 / 60 < d ≤ 150
1.1133 / 20Mn5 / d ≤ 60
1.1133 / 20Mn5 / 60 ≤ 150
1.7218 / 25 CrMo4 / d ≤ 100
1.7225 / 42CrMo4 / d ≤ 60
1.7233 / 42CrMo5-6 / d ≤ 100
1.7711 / 40 CrMoV4-6 / d ≤ 100
1.7709 / 21CrMoV5-7 / d ≤ 160
1.7729 / 20CrMoVTiB4-10 / d ≤ 100
1.5680 / X12Ni5 / d ≤ 40
1.5680 / X12Ni5 / 40 < d ≤ 75
1.5662 / X8Ni9 / d ≤ 40
1.5662 / X8Ni9 / 40 < d ≤ 75
1.7390 / X15CrMo5-1 / d ≤ 160
1.4923 / X22CrMoV12-1 / d ≤ 160
1.4938 / X12CrNiMoV12-3 / d ≤ 160
1.4307 / X2CrNi18-9 / d ≤ 160
1.4301 / X5CrNi18-10 / d ≤ 160
1.4303 / X4CrNi18-12 / d ≤ 160
1.4404 / X2CrNiMo17-12-2 / d ≤ 160
1.4401 / X5CrNiMo17-12-2 / d ≤ 160
1.4429 / X2CrNiMoN17-13-3 / d ≤ 160
1.4948 / X6CrNi18-10 / d ≤ 160
1.4982 / X10CrNiMoMnNBVB15-10-1/ d ≤ 100
1.4910 / X3CrNiMoBN17-13-3 / d ≤ 160
1.4919 / X6CrNiMoB17-12-2 / d ≤ 160
Gasket
Choose an option
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Flat gaskets according to EN 1514-1:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Standard Flat Gasket (2 mm)
Grafilit SP (1.5 mm) (DONIT TESNIT d.o.o.)
G-ST-P/S EPDM (4 mm) (Kroll + Ziller GmbH & Co. KG)
G-ST-P/S FPM (4 mm) (Kroll + Ziller GmbH & Co. KG)
RX® Fibre PT50 (2 mm) (ERIKS bv)
IDT-SIGRAFLEX-Hochdruck Flachdichtung WS 3885-IB 1.4571 0,1 mm (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT-SIGRAFLEX-Universal Pro Flachdichtung WS 3865 (3 mm) (IDT Industrie- und Dichtungstechnik GmbH)
KLINGER® Graphite Laminate TSM150B (1.5 mm) (KLINGER GmbH)
KLINGER® Graphite Laminate TSM200B (2 mm) (KLINGER GmbH)
KLINGER® Graphite Laminate PDM200B (2 mm) (KLINGER GmbH)
KLINGER® Graphite Laminate PSM150B (1.5 mm) (KLINGER GmbH)
KLINGER® Graphite Laminate PSM200B (2 mm) (KLINGER GmbH)
KLINGER® Graphite Laminate SLS150B (1.5 mm) (KLINGER GmbH)
AF-OIL® (2 mm) (Gambit Lubawka Sp. z o.o.)
AF-300B (2 mm) (Gambit Lubawka Sp. z o.o.)
IDT - SIGRAFLEX Hochdruck Pro with inner eyelet; WS 3888 IB; IDT style FD10; LE (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT - SIGRAFLEX Universal Pro with inner eyelet; WS 3865 IB; IDT style FD10; LE (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT - PTFE TFM Envelope gasket with corrugated stainless steel ring; WS 7110/1.4571; IDT style ED01; LE (3.5 mm) (IDT Industrie- und Dichtungstechnik GmbH)
KLINGER® top-graph-2000 (2 mm) (KLINGER GmbH)
KLINGERSIL® C 4300 (2 mm) (KLINGER GmbH)
KLINGERSIL® C 4400 (2 mm) (KLINGER GmbH)
KLINGERSIL® C 4430 (2 mm) (KLINGER GmbH)
KLINGERSIL® C 4500 (2 mm) (KLINGER GmbH)
KLINGERSIL® C 8200 (2 mm) (KLINGER GmbH)
KLINGER® Quantum (2 mm) (KLINGER GmbH)
KLINGER® top-chem-2006 (2 mm) (KLINGER GmbH)
KLINGER® top-sil-ML1 (2 mm) (KLINGER GmbH)
UNISEAL WS 3400 flat gasket -asbestos-free-, FD01 (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT - SIGRAFLEX Hochdruck Pro with pre-compressed centering ring and inner eyelet; WS 3888 HB; IDT style FD11; LE (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
Sigraflex Economy V15010C4 (1.5 mm) (SGL Carbon GmbH)
Sigraflex Basis L20010C (2 mm) (SGL Carbon GmbH)
Sigraflex Hochdruck V15011Z3I (1.5 mm) (SGL Carbon GmbH)
Sigraflex Hochdruck V10011Z3I (1 mm) (SGL Carbon GmbH)
novaphit MST / novaphit MST with XP-Technology (2 mm) (Frenzelit GmbH)
novaphit MST / novaphit MST with XP-Technology (3 mm) (Frenzelit GmbH)
novaphit MST with inner eyelet / novaphit MST with inner eyelet and XP-Technology (2 mm) (Frenzelit GmbH)
novaphit SSTC TA-L with inner eyelet / novaphit SSTC TA-L with inner eyelet and XP-Technology (2 mm) (Frenzelit GmbH)
novaphit SSTC TA-L / novaphit SSTC TA-L with XP-Technology (2 mm) (Frenzelit GmbH)
Rivatherm Super A1 RS2E2-S (1.4401; 98%, D = 1,0g/ccm) (2 mm) (Kempchen Dichtungstechnik GmbH)
rubber-steel gasket profile WG (EPDM) (3.95 mm) (Kempchen Dichtungstechnik GmbH)
AF - 400 (2 mm) (Gambit Lubawka Sp. z o.o.)
AF-U (2 mm) (Gambit Lubawka Sp. z o.o.)
novaphit SSTC TA-L / novaphit SSTC TA-L with XP-Technology (1.6 mm) (Frenzelit GmbH)
novatec PREMIUM XP (2 mm) (Frenzelit GmbH)
AF-200 G (2 mm) (Gambit Lubawka Sp. z o.o.)
Gylon® Style 3510 (3.2 mm) (Garlock GmbH)
GAMBIT MAGNUM (2 mm) (Gambit Lubawka Sp. z o.o.)
Centurion (2 mm) (James Walker Moorflex Ltd)
SENTINEL (2 mm) (James Walker Moorflex Ltd)
Burachem®Multi 9654/MP (2 mm) (EagleBurgmann Germany GmbH & Co KG)
A1 RS2S110I (2 mm) (Kempchen Dichtungstechnik GmbH)
A1 RHD2S305-I (316L / Graphit 99%) (2 mm) (Kempchen Dichtungstechnik GmbH)
RivaTherm-Super Plus A1 RSP2S205-I (316L / Graphit 99%) (2 mm) (Kempchen Dichtungstechnik GmbH)
A1 RS2K110-A (2 mm) (Kempchen Dichtungstechnik GmbH)
AF-MF (2 mm) (Gambit Lubawka Sp. z o.o.)
RivaTherm-Super F1 RS2K110 (2 mm) (Kempchen Dichtungstechnik GmbH)
RivaTherm-Super F1 RS2S110I with inner eyelet (2 mm) (Kempchen Dichtungstechnik GmbH)
Sigraflex Economy V05510C4 (0.55 mm) (SGL Carbon GmbH)
Sigraflex Universal V30010C2I (3 mm) (SGL Carbon GmbH)
Sigraflex Universal V20010C2I (2 mm) (SGL Carbon GmbH)
KLINGERSIL® C 4409 (2 mm) (KLINGER GmbH)
AF-202 (2 mm) (Gambit Lubawka Sp. z o.o.)
multiFlon (2 mm) (FluorTex GmbH)
AF-1000® (2 mm) (Gambit Lubawka Sp. z o.o.)
AF-200 UNIVERSAL (2 mm) (Gambit Lubawka Sp. z o.o.)
PARO-GAMBIT (2 mm) (Gambit Lubawka Sp. z o.o.)
GAMBITGRAF LUX (2 mm) (Gambit Lubawka Sp. z o.o.)
MMBI-10C2I-Pro with inner eyelet (1.4571, 0.15 mm) (2 mm) (Möller Metalldichtungen GmbH)
KLINGERSIL® C 4509 (2 mm) (KLINGER GmbH)
Sigraflex MF V30011Z2MF IB (3 mm) (SGL Carbon GmbH)
KLINGERSIL® C 4430plus (2 mm) (KLINGER GmbH)
F1 Klinger Sil C4400 with inner eyelet (2 mm) (Kempchen Dichtungstechnik GmbH)
KGS/ EPDM (4 mm) (KLINGER GmbH)
KGS/FKM/Viton (4 mm) (KLINGER GmbH)
KGS/NBR (4 mm) (KLINGER GmbH)
AF-OIL® (1 mm) (Gambit Lubawka Sp. z o.o.)
BELPA® CSA 90 (2 mm) (Montero FyE, S.A.)
AF-153 (2 mm) (Gambit Lubawka Sp. z o.o.)
Sigraflex Hochdruck Pro V10011Z3I-P (1 mm) (SGL Carbon GmbH)
Sigraseal V20010M2 (2 mm) (SGL Carbon GmbH)
Sigraflex Economy V07510C4 (0.75 mm) (SGL Carbon GmbH)
novapress® UNIVERSAL (2 mm) (Frenzelit GmbH)
Sigraflex Economy V10010C4 (1 mm) (SGL Carbon GmbH)
KLINGER® top-chem3210 (2 mm) (Eynard Robin, Groupe EFIRE)
KLINGERSIL® C 44GW (2 mm) (Eynard Robin, Groupe EFIRE)
AF-Chemacid (2 mm) (Gambit Lubawka Sp. z o.o.)
AF-GL (2 mm) (Gambit Lubawka Sp. z o.o.)
novapress 850 / novaform 2300 (2 mm) (Frenzelit GmbH)
Sigraflex APX2 Hochdruck V15011W3 (1.5 mm) (SGL Carbon GmbH)
Sigraflex APX2 Hochdruck V20011W3 (2 mm) (SGL Carbon GmbH)
Sigraflex Universal V15010C2I (1.5 mm) (SGL Carbon GmbH)
KLINGERSIL® C4400 (3 mm) (KLINGER GmbH)
KLINGERSIL® C4430 (3 mm) (KLINGER GmbH)
KLINGERSIL® C4430plus (3 mm) (KLINGER GmbH)
KLINGER® Quantum (3 mm) (KLINGER GmbH)
KLINGER® top-chem2000 (2 mm) (KLINGER GmbH)
AFM 34 (2 mm) (REINZ-Dichtungs-GmbH)
KLINGER® top-chem2000 (3 mm) (KLINGER GmbH)
SICHEM S11 (2 mm) (Planichem)
SICHEM S11 (3 mm) (Planichem)
Novaphit SSTC TA-L mit IB 0,1 mm (2 mm) (ERIKS bv)
Sigraflex MF V20011Z2MF IB (2 mm) (SGL Carbon GmbH)
9900 (2 mm) (Garlock GmbH)
BLUE-GARD© 3000 (2 mm) (Garlock GmbH)
AFM 34 CO ME (2 mm) (REINZ-Dichtungs-GmbH)
novapress® 880 mit Innenbördel 0,1 mm (2 mm) (Frenzelit GmbH)
GORE® Joint Sealant DF (2 mm) (W. L. Gore & Associates GmbH)
Sigraflex Standard L20010CI (2 mm) (SGL Carbon GmbH)
Sigraflex Universal Pro V30010C2I-P (3 mm) (SGL Carbon GmbH)
Sigraflex Economy V20010C4 (2 mm) (SGL Carbon GmbH)
Sigraflex APX2 Hochdruck V30011W3 (3 mm) (SGL Carbon GmbH)
SICHEM S33 (3 mm) (Planichem)
SICHEM S50 (2 mm) (Planichem)
FLEXIGRAF® FGS3 (2 mm) (Planichem)
FLEXIGRAF® FGS4 (2 mm) (Planichem)
SICHEM S11 (1.5 mm) (Planichem)
SICHEM S33 (2 mm) (Planichem)
top-chem2005 (2 mm) (KLINGER GmbH)
Sheet gasket material of expanded PTFE, 3.0 mm, AVKOSEAL eC (3 mm) (AVKO jsc.)
KLINGER® top-chem2000soft (2 mm) (KLINGER GmbH)
KLINGER® CompenSil (2 mm) (KLINGER GmbH)
Sheet gasket material of expanded PTFE, 2.0 mm, AVKOSEAL eC (2 mm) (AVKO jsc.)
novapress® 880 (2 mm) (Frenzelit GmbH)
Sigma 511 (PTFE with Silica filler) (2 mm) (Flexitallic Ltd.)
KLINGER® top-chem-2003 (2 mm) (KLINGER GmbH)
Rivatherm Super Plus F1 RSP2S2075-I mit Innenbördel (2 mm) (Kempchen Dichtungstechnik GmbH)
Rivatherm Hochdruck F1 RHD2S3075-I mit Innenbördel (2 mm) (Kempchen Dichtungstechnik GmbH)
Sigraflex Hochdruck Pro V30011Z3I-P (3 mm) (SGL Carbon GmbH)
Sigraflex APX2 Hochdruck V10011W3 (1 mm) (SGL Carbon GmbH)
Sigraflex Select V16010C3I IB (1.6 mm) (SGL Carbon GmbH)
Sigraflex Hochdruck Pro V15011Z3I-P (1.5 mm) (SGL Carbon GmbH)
Sigma 500 (PTFE with Glass Microsphere filler) (2 mm) (Flexitallic Ltd.)
IDT SIGRAFLEX Hochdruck Pro, IDT-WS 3888, IDT-Profil FD01 (1.5 mm) (IDT Industrie- und Dichtungstechnik GmbH)
KLINGER® MilamPSS200BI with inner eyelet (2 mm) (KLINGER GmbH)
IDT SIGRAFLEX Hochdruck Pro, IDT-WS 3888, IDT-Profil FD01 (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT-SIGRAFLEX-Hochdruck Pro, IDT-WS 3888, FD01 (3 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT-SIGRAFLEX-Universal Pro Flachdichtung WS 3865 (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT SIGRAFLEX MF mit Innenbördel; WS 3870 IB; IDT-Profil FD10 (2 mm) (IDT Industrie- und Dichtungstechnik GmbH)
KGS G 2 EPDM (compressed area 66 x 49) (3 mm) (KLINGER GmbH)
KGS G 2 NBR (compressed area 66 x 49) (3 mm) (KLINGER GmbH)
Grafilit EM (1.5 mm) (DONIT TESNIT d.o.o.)
Sigraflex Hochdruck Pro V20011Z3I-P (2 mm) (SGL Carbon GmbH)
Sigraflex Universal Pro V20010C2I-P (2 mm) (SGL Carbon GmbH)
Sigraflex Hochdruck V20011Z3I (2 mm) (SGL Carbon GmbH)
Egraflex Steelflon Waveline WLP (2.3 mm) (KLINGER A.W. Schultze GmbH)
MMD-FG-IE novaphit SSTC-TAL (IB-1.4571-0,15mm) (2 mm) (Möller Metalldichtungen GmbH)
Durlon 8300 (2 mm) (Durlon)
Clipperlon 2110 (2 mm) (Leader Gasket Technologies s.r.o)
Durlon 9000 (2 mm) (Durlon)
Clipperlon 2100 (2 mm) (Leader Gasket Technologies s.r.o)
Gylon® Style 3501E (3.2 mm) (Garlock GmbH)
Gylon® Style 3501E (2 mm) (Garlock GmbH)
GYLON EPIX® Style 3510 EPX (2.4 mm) (Garlock GmbH)
IFG® 5500 (2 mm) (Garlock GmbH)
Gylon® Style 3504 (3.2 mm) (Garlock GmbH)
Gylon® Style 3504 (2 mm) (Garlock GmbH)
Gylon® Style 3510 (2 mm) (Garlock GmbH)
GYLON EPIX® Style 3501-E EPX (2.4 mm) (Garlock GmbH)
GYLON EPIX® Style 3504 EPX (2.4 mm) (Garlock GmbH)
Clipperlon 2100 (3 mm) (Leader Gasket Technologies s.r.o)
Gylon® Style 3522 / 3527 (2 mm) (Garlock GmbH)
NBR-DUO-EL ARAMID (2 mm) (Kroll + Ziller GmbH & Co. KG)
Sigraflex Hochdruck V30011Z3I (3 mm) (SGL Carbon GmbH)
novaflon 300 (2 mm) (Frenzelit GmbH)
GYLON® 3545 (2 mm) (Garlock GmbH)
MultiTex® Sheet & Ring 2.0 (3 mm) (KWO Dichtungstechnik GmbH)
Universal Tape F Premium (width = 5 mm) (2 mm) (KWO Dichtungstechnik GmbH)
STRESS-SAVER® GYLON® 3504 (3.8 mm) (Garlock GmbH)
MultiTex® Sheet & Ring 2.0 (2 mm) (KWO Dichtungstechnik GmbH)
Gylon® Style 3522 / 3527 (3.2 mm) (Garlock GmbH)
GORE® GR Sheet Gasketing (3 mm) (W. L. Gore & Associates GmbH)
GORE® GR Sheet Gasketing (1.5 mm) (W. L. Gore & Associates GmbH)
MultiTex Sheet & Ring 2.0 (6 mm) (KWO Dichtungstechnik GmbH)
BA-U (2 mm) (DONIT TESNIT d.o.o.)
MultiTex® Sheet & Ring 2.0 (1.5 mm) (KWO Dichtungstechnik GmbH)
Sentinel® X (2 mm) (James Walker Moorflex Ltd)
GORE® Gasket Tape Series 500 - 20mm width (3 mm) (W. L. Gore & Associates GmbH)
GORE® Gasket Tape Series 500 - 20mm width (6 mm) (W. L. Gore & Associates GmbH)
GORE® Universal Pipe Gasket (Style 800) (1.5 mm) (W. L. Gore & Associates GmbH)
GORE® GR Sheet Gasketing (6 mm) (W. L. Gore & Associates GmbH)
GORE® Universal Pipe Gasket (Style 800) (3 mm) (W. L. Gore & Associates GmbH)
Tesnit BA-GL (2 mm) (DONIT TESNIT d.o.o.)
Centurion® X (2 mm) (James Walker Moorflex Ltd)
24 SH (3 mm) (TEADIT International Produktions GmbH)
28LS-LE (3 mm) (TEADIT International Produktions GmbH)
30 SH (3 mm) (TEADIT International Produktions GmbH)
GORE® Universal Pipe Gasket (Style 800) (6 mm) (W. L. Gore & Associates GmbH)
MultiTex® Tape (width = 10 mm) (2 mm) (KWO Dichtungstechnik GmbH)
24 B (2 mm) (TEADIT International Produktions GmbH)
30 SH (2 mm) (TEADIT International Produktions GmbH)
TF 1570 (3 mm) (TEADIT International Produktions GmbH)
TF 1580 (2 mm) (TEADIT International Produktions GmbH)
TF 1570 (2 mm) (TEADIT International Produktions GmbH)
Fluolion® 900 (3 mm) (James Walker Moorflex Ltd)
Fluolion® 800 (2 mm) (James Walker Moorflex Ltd)
Fluolion® 700 (3 mm) (James Walker Moorflex Ltd)
Fluolion® 700 (2 mm) (James Walker Moorflex Ltd)
Fluolion® 200 (3 mm) (James Walker Moorflex Ltd)
TF 1590 (3 mm) (TEADIT International Produktions GmbH)
NA1002 (2 mm) (TEADIT International Produktions GmbH)
TF 1590 (2 mm) (TEADIT International Produktions GmbH)
Sigma 511 (Biaxally Orientated PTFE with Silica filler) (3 mm) (Flexitallic Ltd.)
NA1100 (2 mm) (TEADIT International Produktions GmbH)
24 SH (6 mm) (TEADIT International Produktions GmbH)
Durlon 8500 (2 mm) (Durlon)
Fluolion® 200 (6 mm) (James Walker Moorflex Ltd)
AF-SUPERSOFT (2 mm) (Gambit Lubawka Sp. z o.o.)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Spiral wound gaskets according to EN 1514-2:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
BPG 9336SIC (4.5 mm) (Burgmann Packings Group GmbH)
MS 16HP (spiral wound gasket; 1.4541 / 1.4541 with NQ FG / CS) (5.1 mm) (DONIT TESNIT d.o.o.)
Spiraltherm 9594/GIA (5 mm) (EagleBurgmann Germany GmbH & Co KG)
R 316 L PTFE, C/O 316 L PTFE, C/I 316 L PTFE, RIR 316 L PTFE (4.5 mm) (ERIKS bv)
Spiral Wound CGI PTFE/316L (4.6 mm) (Flexitallic Ltd.)
Spiral Wound CGI TH835/321L (4.8 mm) (Flexitallic Ltd.)
Spiral Wound Gasket, CGI style - Graphite filler and 321/1.4541 windings (4.6 mm) (Flexitallic Ltd.)
Spiralwound gasket with graphite filler; WS 1.4301 3800 St37 coated; IDT style SD10; LE (4.9 mm) (IDT Industrie- und Dichtungstechnik GmbH)
Spiral wound gasket SpV2I - Graphite (1.4541 / 0,5 mm; D = 1,0g/ccm) (4.85 mm) (Kempchen Dichtungstechnik GmbH)
LG-13-IR/SRI (4.8 mm) (Leader Gasket Technologies s.r.o)
MMSIA with mica (spiralwound with mica, carrier material 1.4541) (5 mm) (Möller Metalldichtungen GmbH)
MMSIA graphite spiral wound gasket (5 mm) (Möller Metalldichtungen GmbH)
PJS S1ZG with graphite filler (4.5 mm) (P.J.Schulz)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
PTFE Envelope gaskets according to EN 1514-3
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Profile gasket PW21 (1.4541; TFM1600; s=0,75mm) (3.5 mm) (Kempchen Dichtungstechnik GmbH)
Zilken corrugated gasket 1.4571 with TFM1600-envelope - type: ZK104022 (3.5 mm) (M. Zilken GmbH)
MMWHD (envelope gasket with inner inside diffusion barrier and stainless steel corrugated ring) (3.5 mm) (Möller Metalldichtungen GmbH)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Corrugated gaskets according to EN 1514-4:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MW12A-3 (corrugated gasket; 1.4571 / nuclear graphite - 0.8 mm) (2.9 mm) (DONIT TESNIT d.o.o.)
Corrugated gasket with graphite layers - Corratherm® 9631 (3 mm) (EagleBurgmann Germany GmbH & Co KG)
G2 (2.9 mm) (ERIKS bv)
KNS (5.5 mm) (ERIKS bv)
Corrugated gasket with graphite layers and inner eyelet; WS 1.4571/3803/1.4571; IDT style WD20; LE (3 mm) (IDT Industrie- und Dichtungstechnik GmbH)
IDT - Corrugated gasket with graphite layers; WS 1.4571/3803; IDT style WD10; LE (3 mm) (IDT Industrie- und Dichtungstechnik GmbH)
Corrusafe - Graphite / PTFE (2 mm) (James Walker Moorflex Ltd)
Corrugated gasket W1A-3 - Graphite (1.4571 / 0,8 mm; D 1,0 g/ccm) (3 mm) (Kempchen Dichtungstechnik GmbH)
LEADER CG 4 (2.9 mm) (Leader Gasket Technologies s.r.o)
Elastagraph 316SS corrugated with graphite (2.4 mm) (Leader Gasket Technologies s.r.o)
CG3-3mm pitch/G21-3 mm pitch, corrugated with graphit (3 mm) (Leader Gasket Technologies s.r.o)
Zilken corrugated gasket 1.4571 with graphite layers and inner eyelet 1.4571 - type: ZK105027 (3 mm) (M. Zilken GmbH)
Corrugated gasket with graphite layers - Matusza Wellring MF XP (2.75 mm) (Matusza Dichtungstechnik GmbH)
MMW mit Graphitauflage (1.4571/0.8 mm) (3 mm) (Möller Metalldichtungen GmbH)
MMWIB corrugated gasket with graphite layers and inner eyelet (1.4571, 0.15 mm) (3 mm) (Möller Metalldichtungen GmbH)
Eco+ with graphite (1.6 mm) (revoseal Europe GmbH)
Revolution with graphite (1.6 mm) (revoseal Europe GmbH)
Revolution with PTFE (1.2 mm) (revoseal Europe GmbH)
JP-2 graphite (4.2 mm) (revoseal Europe GmbH)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Kammprofile gaskets according to EN 1514-6:
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
BPG 9470F (5 mm) (Burgmann Packings Group GmbH)
Kammprofil Dichtung 9598/P (5 mm) (EagleBurgmann Germany GmbH & Co KG)
KV Graphite, KV9 Graphite, KV9L Graphite (4.8 mm) (ERIKS bv)
KV PTFE, KV9 PTFE, KV9L PTFE (4.2 mm) (ERIKS bv)
Thermiculite 845 faced Kamm profile 4" Class 300 (4 mm) (Flexitallic Ltd.)
Gamprofil GR (5.5 mm) (Gambit Lubawka Sp. z o.o.)
IDT-KD10-20-30 WS 1.4571/3803 (5 mm) (IDT Industrie- und Dichtungstechnik GmbH)
Metakamm LGCK (5 mm) (James Walker Moorflex Ltd)
Metakamm ActiVate (4 mm) (James Walker Moorflex Ltd)
Grooved gasket B7A / B9A / B15A Graphite (1.4541 / 0,5 mm; D = 1,0g/ccm) (4.8 mm) (Kempchen Dichtungstechnik GmbH)
Grooved gasket B25A / B27A / B29A-PTFE unsintered (1.4541 / 0,35 mm) (4.8 mm) (Kempchen Dichtungstechnik GmbH)
Grooved gasket B7A / B9A / B15A PTFE unsintered (1.4541 / 0,35 mm) (4.5 mm) (Kempchen Dichtungstechnik GmbH)
B25A / B27A / B29A - Graphite with/without inner eyelet (1.4541 / 0,5 mm; D = 1,0g/ccm) (4.9 mm) (Kempchen Dichtungstechnik GmbH)
LG - 413 (4.8 mm) (Leader Gasket Technologies s.r.o)
MMKBZ (convex kammprofile gasket with graphite layers) (4.8 mm) (Möller Metalldichtungen GmbH)
MMKZ1P (kammprofile gasket with PTFE layers) (5 mm) (Möller Metalldichtungen GmbH)
MMK(Z) (kammprofile gasket with graphite layers) (4.8 mm) (Möller Metalldichtungen GmbH)
Operating Pressure
Choose an option
5 bar
10 bar
15 bar
20 bar
25 bar
30 bar
35 bar
40 bar
45 bar
50 bar
55 bar
60 bar
65 bar
70 bar
75 bar
80 bar
85 bar
90 bar
95 bar
100 bar
105 bar
110 bar
115 bar
120 bar
125 bar
130 bar
135 bar
140 bar
145 bar
150 bar
155 bar
160 bar
165 bar
170 bar
175 bar
180 bar
185 bar
190 bar
195 bar
200 bar
205 bar
210 bar
215 bar
220 bar
225 bar
230 bar
235 bar
240 bar
245 bar
250 bar
255 bar
260 bar
265 bar
270 bar
275 bar
280 bar
285 bar
290 bar
295 bar
300 bar
305 bar
310 bar
315 bar
320 bar
325 bar
330 bar
335 bar
340 bar
345 bar
350 bar
355 bar
360 bar
Operating Temperature
Choose an option
10 °C
20 °C
30 °C
40 °C
50 °C
60 °C
70 °C
80 °C
90 °C
100 °C
110 °C
120 °C
130 °C
140 °C
150 °C
160 °C
170 °C
180 °C
190 °C
200 °C
210 °C
220 °C
230 °C
240 °C
250 °C
260 °C
270 °C
280 °C
290 °C
300 °C
310 °C
320 °C
330 °C
340 °C
350 °C
360 °C
370 °C
380 °C
390 °C
400 °C
410 °C
420 °C
430 °C
440 °C
450 °C
460 °C
470 °C
480 °C
490 °C
500 °C
510 °C
520 °C
530 °C
540 °C
550 °C
560 °C
570 °C
580 °C
590 °C
600 °C
Flange Joint Analysis according to 1591-1 for EN 1092 Compliant Flanges quantity
Add to cart
Close product quick view
×
Title
Page load link
Go to Top
